The Laser Co

The Laser Co Welcome to The Laser Co, a design & fabrication studio based in Sydney. Looking for a quick quote?

A layered sign made for the Dalzell Law office door. Made from matte black acrylic backing board and matte white vinyl d...
04/06/2026

A layered sign made for the Dalzell Law office door. Made from matte black acrylic backing board and matte white vinyl detail with two hang holes, the sign is stylish and functional.

Message us to discuss your office signage. ゚

A Special Project for Peterson House in the Hunter Valley. A large piece of Ironbark Timber was supplied by the venue th...
02/06/2026

A Special Project for Peterson House in the Hunter Valley. A large piece of Ironbark Timber was supplied by the venue that just fit into the laser! The timber was laser engraved with the detail by the Laser Co then prepared and mounted by the Peterson House staff.

Message us to discuss laser engraving

A selection of A-Frames we made over the last few months. Painted, Natural with Acrylic and vinyl detail, these A-Frames...
28/05/2026

A selection of A-Frames we made over the last few months. Painted, Natural with Acrylic and vinyl detail, these A-Frames are for Allied Health Practitioners, Cafe's and a Wine Bar.

Message us to discuss your A-frame requirements.

A stainless steel plaque we marked for a display in western NSW. The marks were made via laser engraving Cermark that ha...
26/05/2026

A stainless steel plaque we marked for a display in western NSW. The marks were made via laser engraving Cermark that had been sprayed onto the steel. After marking, the Cermark is washed off leaving the engraved ares as black detail.

Message us to discuss steel and other metal marking.

Stencils! Two stencils we cut from 1.4 mm polypropylene over the last month. Used to paint logos onto floor mat material...
21/05/2026

Stencils! Two stencils we cut from 1.4 mm polypropylene over the last month. Used to paint logos onto floor mat material at regular intervals. These stencils are easy to use, washable and reusable.

Message us for your stencil requirements

Small A-Frames: A series of photos showing small 600 mm x 300 mm A-frames made over the last few months for various clie...
19/05/2026

Small A-Frames: A series of photos showing small 600 mm x 300 mm A-frames made over the last few months for various clients. Boards are either natural varnished or painted with custom colours with black or white vinyl detail. These A-Frames are non invasive and noticable.

Message us to discuss your A-frame requirements

A layered sign in 5 pieces for the Northern Districts display at the Sydney Royal Easter show. The sign is 5 metres long...
14/05/2026

A layered sign in 5 pieces for the Northern Districts display at the Sydney Royal Easter show. The sign is 5 metres long x 800 mm high made from 6 mm Plywood backing boards and 9 mm MDF detail. The boards are painted white with text painted black. We hand delivered to the show the day prior to opening so the team could install the sign.

Message us to discuss your event signage.

A recent project to refurbish an A-Frame. The original A-Frame was returned with moisture damage. The client wanted it r...
12/05/2026

A recent project to refurbish an A-Frame. The original A-Frame was returned with moisture damage. The client wanted it refurbished. We removed the detail, sanded the plywood back to natural, stained the boards black, varnished and applied the new detail.

If you have an old timber A-Frame and would like a refurbishment, please contact us.

Laser marking stainless steel. We can mark metals using a special spray coating then laser engraving the detail. The res...
25/03/2026

Laser marking stainless steel. We can mark metals using a special spray coating then laser engraving the detail. The result is the black detail on the piece. Message us to discuss your metal marking requirements.

A pair of A-frames we made for Body Maestro. Made from exterior grade plywood (varnished & painted), matte black and whi...
23/03/2026

A pair of A-frames we made for Body Maestro. Made from exterior grade plywood (varnished & painted), matte black and white acrylic and vinyl, these were used at an event in February then in the business. Message us to discuss your custom a-frame design.

Address

BY APPOINTMENT
Sydney, NSW
2327

Opening Hours

Monday 10am - 4pm
Tuesday 10am - 4pm
Wednesday 10am - 4pm
Thursday 10am - 4pm
Friday 10am - 4pm

Telephone

+61283792008

Website

Alerts

Be the first to know and let us send you an email when The Laser Co posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The Laser Co:

Shortcuts

Featured

Share