Near North Supply

Near North Supply Wholesale distributor of Plumbing, HVAC, Water Treatment, Groundwater, Hydronics and Wastewater fittings, pumps, pipes and tanks.

INSULATION: IMCOLOCK® has a low thermal conductivity and very low water v***r transmission rate. This low density produc...
04/30/2024

INSULATION: IMCOLOCK® has a low thermal conductivity and very low water v***r transmission rate.

This low density product demonstrates excellent thermal, physical and chemical resistant properties and has a broad service temperature range between -330°F and 210°F (-201°C and 99°C). It can be installed in commercial, industrial and residential insulation projects.
Acceptable for use with heat tracing/heat tape.
Installation
IMCOLOCK® is pre-slit with factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has convenient built-in release tabs for easy installation: slip on the tube, pull the tab, and pinch it shut. It can be easily pushed around P-traps and fittings, though mitering is recommended for optimum performance. All butt joints should be sealed with 320 or 620 (black) Contact Adhesive or other approved sealing system. It is easily cut with a sharp knife.
IMCOLOCK® is available in a wide range of l.D.s and is sized to fit over copper couplings and fittings. It should be installed on pipes that have been pre-tested for leaks, are not presently hot, and have application temperatures that will not exceed 210°F (99°C).
Outdoor Applications
IMCOLOCK® pipe insulation is made from UV resistant polyolefin resins. For severe UV exposure (rooftop applications) or where optimum performance is required, the product must be protected from the elements. Various jacketing or cladding materials are recommended, ie. PVC, CPVC, AL, etc. If coatings are going to be used, please refer to technical bulletin for recommended coatings.
Underground
For buried lines above the water table, use a clean fill such as sand (3" - 5" layer) to protect IMCOLOCK® before backfilling. It is recommended to use a minimum 1" wall thickness and the materials to be buried are properly sealed at all seams and butt joints with an approved contact adhesive. For optimum performance, the lines should be encased in a conduit to protect them from problems associated with ground water.

For more information, give us a call at 705-721-9112, or visit us in store at 191 Big Bay Point Road, Barrie Ontario

VIPERT: VIPERT Polyethylene-Raised Temperature Radiant with Oxy-Barrier is ideal for hydronic radiant heating, cooling a...
04/26/2024

VIPERT: VIPERT Polyethylene-Raised Temperature Radiant with Oxy-Barrier is ideal for hydronic radiant heating, cooling and snow melting systems utilizing water or a water/glycol mix as the heat or cold transfer medium.
Technical Data
• Colour: Green
• Available Sizes: ½” - 3/4”
• Coil Sizes: 100’ - 250’ - 300’ - 1000’
• Approvals: ASTM E84, NSF-rfh ASTM D2623, CAN/ULC S101, CAN/ULC S102.2�

For more information, give us a call at 705-721-9112, or visit us in store at 191 Big Bay Point Road, Barrie Ontario

INSERT FITTINGS: We carry an extensive list of insert fittings. Whether you’re looking for Nylon, PVC, stainless, or bra...
04/24/2024

INSERT FITTINGS: We carry an extensive list of insert fittings. Whether you’re looking for Nylon, PVC, stainless, or brass, Near North Supply is able and ready to supply you with the products you need to complete your next job.�

For more information, give us a call at 705-721-9112, or visit us in store at 191 Big Bay Point Road, Barrie Ontario

Happy Earth Day! From all of us at Near North Supply. 🌎 nearnorthsuuply.comGive us a call at 705-721-9112, or visit us i...
04/22/2024

Happy Earth Day! From all of us at Near North Supply. 🌎

nearnorthsuuply.com
Give us a call at 705-721-9112, or visit us in store at 191 Big Bay Point Road, Barrie Ontario

Flexible Rubber Couplings: An extensive line of flexible sewer couplings that connect similar and dissimilar pipe materi...
04/19/2024

Flexible Rubber Couplings: An extensive line of flexible sewer couplings that connect similar and dissimilar pipe materials and sizes. Sizes 1-1/4" to 72"
- Flexibility - Sleeve is manufactured of molded natural and synthetic rubber �- Leakproof Seal - Inside surfaces of transitional size couplings are stepped to conform better to different pipe sizes �- Tight Fitting - Two 300 Series Stainless Steel worm drive clamping bands hold pipe ends securely �- Corrosion Resistant - Use of stainless steel clamping bands are highly effective in a variety of environments �- Versatile - Blends of natural and synthetic rubbers permit a substantial degree of distortion without change in basic physical or chemical resistance unlike other manufacturers' thermoplastic coupling materials
Specifications:
- CSA Listed�- Manufactured with natural and synthetic rubbers conforming to ASTM C 425, ASTM C 1173 �- 300 Series Marine Grade Stainless Steel conforms to ASTM A 240�
For more information, give us a call at 705-721-9112, or visit us in store at 191 Big Bay Point Road, Barrie Ontario

Did You Know?nearnorthsupply.comFor more information, give us a call at 705-721-9112, or visit us in store at 191 Big Ba...
04/17/2024

Did You Know?

nearnorthsupply.com
For more information, give us a call at 705-721-9112, or visit us in store at 191 Big Bay Point Road, Barrie Ontario

BRASS BALL VALVES: "BII" Forged Brass Full Port Ball Valves, No Lead Series 0827The following CSA gas approvals apply to...
04/15/2024

BRASS BALL VALVES: "BII" Forged Brass Full Port Ball Valves, No Lead Series 0827

The following CSA gas approvals apply to ¼" - 2" threaded valves only: BRS125G 125 PSIG RATING (USA), ASME B16.33 STANDARD, CAN 3.16 CAN / CGA - 3.16 STANDARD, 125 PSIG RATING (CAN) FOR OUTDOOR USE ½ PSI ANSI Z21.15 (USA), CGA 9.1 (CAN) ½ PSIG Appliance Valve, 5G STANDARD 3.88 (USA), STANDARD CR91-002 (CAN) 5 PSIG Rated Gas Valve.

Features:�- CWP (Cold Working Pressure) Rating: -20F to +100F (-28C to +37C)�- ¼" thru 2" rated 600 PSI CWP, 2-½" thru 4" rated 400 PSI CWP�- Max Temp Rating: 300F (150C)�- Packing: PTFE (polytetrafluoroethylene) �- WSP (Working Steam Pressure) Rating: 150 PSI Saturated Steam�- Forged brass body�- Chrome Plated Ball�- Blow-out Proof Stem�- Yellow plastic sleeve�- NSF/ANSI Standard 61 Certified�- CSA Certified: 1/4" thru 2" threaded�- UL Certified: 1/4" thru 2" threaded and CxC�- FM Certified: 1/4" thru 2" threaded and CxC�- cUPC Standard IGC 157 Certified: 1/4" thru 2" threaded and CxC��

Buy online now at: nearnorthsupply.com

For more information, give us a call at 705-721-9112, or visit us in store at 191 Big Bay Point Road, Barrie Ontario

WE LOVE HEARING FROM YOU!CUSTOMER REVIEW: Called in and spoke to one of the guys on the counter. I was very pleased with...
04/12/2024

WE LOVE HEARING FROM YOU!
CUSTOMER REVIEW: Called in and spoke to one of the guys on the counter. I was very pleased with the service I received. I had a challenging install and was given information and pointers. Very impressed with the help I got, will be back in the future.��

Give us a call at 705-721-9112, or visit us in store at 191 Big Bay Point Road, Barrie Ontario

STAINLESS STEEL FITTINGS: Stainless Steel Fittings are made of corrosion-resistant 304 type stainless steel for long las...
04/11/2024

STAINLESS STEEL FITTINGS: Stainless Steel Fittings are made of corrosion-resistant 304 type stainless steel for long lasting durability and dependability. Various configurations of 1/8 to 2" size. Threaded Pipe Fittings Class 150 304 stainless steel has good corrosion resistance. Use with stainless steel Schedule 40 pipe ni***es. Applications: air, water, oil, natural gas and steam. Pressure: Class 150.lb NPT threads.
Specifications:
•Materials: ASTM A351 Sch 40 304 Stainless Steel Class 150
•Pressure Test: 300 PSI WOG, 150 PSI Saturated Steam,
•Dimensions: ISO 4144
•Threads meet ASME/ANSI B1.20.1 NPT
*Third Party Certified to NSF/ANSI 61 and NSF/ANSI 372�

For more information, give us a call at 705-721-9112, or visit us in store at 191 Big Bay Point Road, Barrie Ontario

DAB JET PUMPS: Self-priming centrifugal pump with excellent suction capacity even when there are air bubbles. Particular...
04/09/2024

DAB JET PUMPS: Self-priming centrifugal pump with excellent suction capacity even when there are air bubbles. Particularly suitable for water supply in domestic installations, small-scale agriculture, gardening and wherever self- priming operation is necessary.
JETSS: stainless steel pump body.
Motor support in cast iron, technopolymer impeller, diffuser, Venturi tube and sand guard. Stainless steel adjustment rings. Carbon/ceramic mechanical seal. Asynchronous motor closed and cooled by external ventilation. Built-in thermal and current overload protection and a capacitor permanently on in the single-phase version.
Features:
• Operating range: 1.8 to 46.2 gpm (0.4 to 10.5 m3/h) with head up to 203 ft (62 m).
• Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.
• Liquid temperature range: 32°F to +95°F (0°c to +35°C ) for domestic use.
• Maximum suction depth: 29 ft
• Maximum ambient temperature: +104 F (+40°C).
• Maximum pressure: 116 psi (8 bar).
• Motor range: ½ Hp , ¾ Hp, 1Hp
• Standard input voltage: single phase 115/230 V - 60 Hz Dual Voltage
• Enclosure: IP 44 (IP 55 terminal board protection)
• Insulation class: F
• Installation: Horizontal fixed position
Approvals: CSA certification to
• CSA Standard C22.2 No 108- 14 Liquid Pumps.
• UL Standard 778- 5th Edition- Motor operated water pumps�
buy online at: nearnorthsupply.com

For more information, give us a call at 705-721-9112, or visit us in store at 191 Big Bay Point Road, Barrie Ontario

STAINLESS STEEL PEX: Boshart’s Stainless Steel PEX Crimp fittings are great for all PEX applications. They are premium q...
04/04/2024

STAINLESS STEEL PEX: Boshart’s Stainless Steel PEX Crimp fittings are great for all PEX applications. They are premium quality and durable. Featuring high corrosion resistance, and are ideal for areas with high acidity and anywhere water quality is an issue.�

Features:�• Material: 304 Stainless Steel�• Lead Free: Yes�• Application: Plumbing or Heating�• Standard: ASTM F1807 cUPC Certified, No Lead, NSF/ANSI 372, NSF/ANSI 61�• Fitting System Compatibility: Copper Crimp Ring, Stainless Steel Clamp or Crimp Sleeve�• Tubing Compatibility: PEX�• Max Temp: Up to 400°F (204°C)�• Max Pressure: 200 PSI (1378.9 Kpa)�

For more information, give us a call at 705-721-9112, or visit us in store at 191 Big Bay Point Road, Barrie Ontario

Effective Monday, April 1st 2024 until September 29th 2024, our hours of operation will be7am-6pm Monday to Thursday, an...
04/01/2024

Effective Monday, April 1st 2024 until September 29th 2024, our hours of operation will be7am-6pm Monday to Thursday, and 7am-5pm on Fridays.�

For more information, give us a call at 705-721-9112, or visit us in store at 191 Big Bay Point Road, Barrie Ontario

Address

191 Big Bay Point Road
Barrie, ON
L4N8M5

Opening Hours

Monday 7am - 6pm
Tuesday 7am - 6pm
Wednesday 7am - 6pm
Thursday 7am - 6pm
Friday 7am - 6pm

Telephone

+17057219112

Alerts

Be the first to know and let us send you an email when Near North Supply posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Near North Supply:

Share