The last bits ro do
Finishing touches
Working Hard
Jamie being assisted by Martin who is a sixth generation member of the family
Glass engraving
Sandblast engraving is part and parcel of modern memorial production. We can apply the same process to engrave on glass. Here Ciaran is etching a glass panel for the lamp to go on the old gas lamp bracket outside banks and braes.
Cutting St Bees sandstone
Garry now back after shielding for over three months working our old Anderson Grice bridge saw. We bought the saw from Galloway Granite in 1977 it was over 50 years old then.
Steam Cleaning Monument
Working in Falkirk, testing a steam cleaner on Granite,
Does it work? cannae see
Training in progress Knab Cemetery lerwick, Shetland
Training in progress Knab Cemetery lerwick, Shetland
Using the old Bon-Accord pneumatic hammer with 1" and 2" tungsten carbide tipped chisels, to give the stone an ancient chiselled appearance. These hammers are frowned upon by the HSE as continued use can give the user 'vibration white finger' pleased to say we don't use it often enough to cause us any problems.
Boring out sandstone blocks with core drill to make planters
Sandstone blocks from the Prince of Wales Viaduct at Tongland being bored out to make large planters for The Banks. The drill bit is 150mm (6") in diameter and the blocks just fitted under the shaft, we had to use the stacker to jack the blocks up onto the core bit to get the depth.
Just in Case
Just to make sure Ciaran dosen't claim all the credit for the Haugh of Urr stone
Weeding out vinyl for signs
Abbie Caldow also trying out work at Kirkcudbright, here she is weeding out vinyl which is to go on a window in a nearbye hotel. We were all encouraged to try work as young as possible, which builds confidence.
Ciaran hard at work aged 9
Just being able to hold the chisel correctly and then being able to control the hammer and make an impact on the stone on your first attempt shows great promise, wish I had been so confident when I started. (Generation six in the making)