Alfred fashion home

Alfred fashion home Clothing and designing company. Dealing with fabric and materials. Local and international markets.

Forsale K400,000.
03/06/2026

Forsale K400,000.

28/05/2026

trousers waist of 32 is likely to have hip of 40 inches and thigh of 24 inches..

23/05/2026

Do this to solve neck tightness when you are buttoning up the shirt around the neck..

ok ! let's start... whenever you take neck circumference of your client, one of your left finger must pass between the tape and the neck of your client. Imagine the size you get is 15 inches, then add extra 2 inches . it means when you will be cutting neck base , measure length of 17 inches not 15 inches which you got on measurement 🤔.

Why do we add extra 2 inches?? Remember that when we button up shirt,two pieces of front side overlap 🤔,so this extra two inches is used to make sure that 15 inches must be maintained..🤗

It means that if you don't add extra 2 inches by the time you button up , the neck circumference reduced down by two inches because of overlapping part as a result the client feel too fitted around the neck...

Thanks you🤝

23/05/2026

Do you face a challenge where by whenever you take neck circumference of a client correctly but when finish sewing you discover that the first top button of a shirt is too tight to close?

worry not I will drop here how you can fix this challenge.

22/05/2026

whenever you are cutting waist of male trouser take waist readings by starting from pocket side, going to crotch side then add extra one inch. After that connect the point with hip point...

whenever you are cutting waist of female trouser take waist readings by starting from crotch side , don't add extra inches. After that connect the point with hip point.

22/05/2026

whenever you are cutting waist of Men trouser take waist readings from pocket side going to crotch side and add extra one inch then connect down with hip point.

Whenever you are cutting waist of female trouser take waist readings from crotch side going to pocket side and don't add extra inches, then connect down with hip point.

22/05/2026

When did you discover that rumples which form around the armhole of Men shirt are due to poor cutting of front pieces? As of me I discovered this in 2019, by then I was 3 years old in industry.

22/05/2026

How do you find crotch depth of female high waist trouser?

Fedo uses this trick.

@ Hip measurement divide by 4 then add 3 inches if your client is shot, add 4 inches if your client is tall. The figure you get is crotch depth of high waist female trouser. 🔥🔥🔥🔥

21/05/2026

Let's remind one another that Men shirt sizes are not taken fitted but the trick is here.

@ Start with fitted chest then add 2 inch if your client wants fitted shirt

@ Add 4 inches to fitted shest measurements if your client wants un fitted shirt 🔥🔥🤗

20/05/2026

They are so many ways tailors use to find crotch depth as for me I prefer hip divide by 4.

Note: this formula does not work to every client.

It means that if your Hip is 40inches then your crotch depth is 10inched. Mind you, this does not apply to female trouser of normal waist band.

whenever you are sewing female trouserof normal waist band, remember to subtract one inch from your hip divide by 4 crotch length . and again this technique won't work if you apply to high waist trouser....

Address

Uliwa
Karonga

Website

Alerts

Be the first to know and let us send you an email when Alfred fashion home posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category