Heat Transfer New Zealand

30/03/2026

Are you based in rural New Zealand ?

Heat Transfer are a New Zealand owned company that supplies heat exchange solutions nationwide.

Feel free to give us a call, whether you're a dairy farmer or you run the local craft brewery.

15/03/2026

Did you know you may not need to replace your Heat Exchanger by purchasing a new system ?

Depending on the condition, we can repair and refurbish your Heat Exchanger and save you money! 💵

https://heatnz.co.nz/heat-exchanger-refurbishment/

09/03/2026

STOP! Don't throw out those dirty plates. They can often be cleaned, checked for holes and then reused in your heat exchanger.

If your heat exchanger needs maintenance, let us know. We also have a product to clean brazed heat exchangers, so that is also no problem for us.

Read about that product here:

Our cooling towers are induced draft towers, with fill options including splash fill and film fill, and we offer low noise fans

02/02/2026

Do you need a Brazed Heat Exchanger ?

Affordable ✅
Reputable ✅
Fast Shipping ✅

https://heatnz.co.nz/brazed-heat-exchangers/

Brazed, plate, tubular heat exchangers. Plus spare plates and gaskets. Fast service. 30+ years of experience in heat transfer.

15/12/2025

Don’t buy a new heat exchanger before you’ve checked the following:

✅ Plates have been cleaned.
✅ Plates have been crack tested.
✅ Gaskets have been replaced.
✅ Heat exchanger frame has been reconditioned if needed.
✅ An engineer has designed, installed and / or tested the heat exchanger.

Contact us today for assistance with your Heat Exchanger!

09/12/2025

Our final day at the office for the year is Friday, December 19, and we need any last orders (dependent on stock) before 4pm that day.

Built-up plate heat exchangers need to be ordered before Tuesday, December 9 to be despatched by this deadline.

We will re-open Monday, January 19 with our usual hours

If you have urgent concerns during the break, please feel free to contact us :)

24/09/2025

We regularly have people contacting us asking "can you supply brazed heat exchangers?!"

YES. We have a range of brazed plate heat exchangers in stock - on the shelf! Available with a quick turnaround, usually in your hands within a few days.

Contact us here or at [email protected]

08/09/2025

Need new plates for your Heat Exchanger?

Send us a message today!

24/08/2025

Used or dirty plates?

We have a wide range of spares if you need replacement plates or gaskets.

Plus, we can clean your existing plates if they're in good enough condition to keep!

10/08/2025

Do you require a new heat exchanger?

We will provide you with the best service and advice. Whether you require a new heat exchanger or service and parts.

Send us a message today!

05/08/2025

It has been 6 months since our last social media post! 👀

Time flies when you're having fun!