Fine Line Cutting LLC

Fine Line Cutting LLC Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Fine Line Cutting LLC, Dickinson, TX.

Another piece of the hose reel coming together.This is one of two custom end pieces waterjet cut for the same hose reel ...
08/31/2026

Another piece of the hose reel coming together.

This is one of two custom end pieces waterjet cut for the same hose reel project as the sprocket. Jobs like this are a good example of how multiple custom components can be cut to spec and built to work together as part of the finished assembly.

Piece by piece. Cut to fit.

Custom parts built for a specific job.This is one of several clamp components waterjet cut from 3/4-inch aluminum, keepi...
08/28/2026

Custom parts built for a specific job.

This is one of several clamp components waterjet cut from 3/4-inch aluminum, keeping the profile accurate and the edges clean for the next stage of the build. Whether it’s a handful of custom pieces or a larger production run, every part gets cut to spec.

Clean cuts. Accurate parts. Ready to work.

A good fabrication setup starts with an accurate foundation.This fixture table top was waterjet cut from 1/2-inch steel,...
08/26/2026

A good fabrication setup starts with an accurate foundation.

This fixture table top was waterjet cut from 1/2-inch steel, keeping the layout, openings, and dimensions right where they need to be. When the table itself is built for precision, everything fabricated on top of it has a better starting point.

Built square. Cut to spec.

Three inches of steel and no room for guesswork.These custom shims were waterjet cut from 3-inch steel, giving us the ac...
08/24/2026

Three inches of steel and no room for guesswork.

These custom shims were waterjet cut from 3-inch steel, giving us the accuracy and clean profile needed without introducing heat into the material. Thick plate, custom dimensions, and precision cuts are exactly what waterjet is built to handle.

Thick material. Clean results.

Heavy steel and clean cuts.These lifting fl**ge halves were waterjet cut from 1-inch steel, keeping the dimensions accur...
08/21/2026

Heavy steel and clean cuts.

These lifting fl**ge halves were waterjet cut from 1-inch steel, keeping the dimensions accurate and the edges clean for the next stage of fabrication. When you’re working with thicker material, getting the cut right from the start makes everything downstream easier.

Cut to spec. Ready for fabrication.

A few pallets worth of custom work headed out.This custom grating was waterjet cut from 1/2-inch HDPE, giving us clean, ...
08/19/2026

A few pallets worth of custom work headed out.

This custom grating was waterjet cut from 1/2-inch HDPE, giving us clean, consistent cuts across a full production run. Waterjet isn’t limited to metal—it handles plastics and other materials just as effectively when accuracy and repeatability matter.

Cut to spec. Built for the application.

Heavy-duty parts start with heavy-duty material.These custom clamps were waterjet cut from 1-inch steel, delivering the ...
08/17/2026

Heavy-duty parts start with heavy-duty material.

These custom clamps were waterjet cut from 1-inch steel, delivering the accuracy and clean edges needed to get the job done right. From one-off custom parts to full production runs, we cut to spec and keep it moving.
Built heavy. Cut precise.

From the cutting table to final fabrication.These 1/2-inch steel strips were waterjet cut and formed before heading to t...
08/14/2026

From the cutting table to final fabrication.

These 1/2-inch steel strips were waterjet cut and formed before heading to the next stage for welding. Accurate cuts from the start help everything line up where it should when it’s time to put the finished assembly together.

Cut clean. Formed right. Ready to weld.

Built for demanding environments.These subsea components were waterjet cut from 3/4-inch Grade 50 steel, delivering the ...
08/10/2026

Built for demanding environments.

These subsea components were waterjet cut from 3/4-inch Grade 50 steel, delivering the clean edges and tight tolerances required for critical offshore applications. When the job calls for strength, accuracy, and consistency, precision isn’t optional.

Engineered for the toughest jobs.

Just a small portion of an order totaling a couple thousand linkage arms.Cut from 1/8-inch stainless steel, every part i...
08/07/2026

Just a small portion of an order totaling a couple thousand linkage arms.

Cut from 1/8-inch stainless steel, every part in a production run like this needs to meet the same exact standards. Waterjet cutting delivers the repeatability, clean edges, and tight tolerances manufacturers rely on from the first piece to the last.

Production quality starts with precision.

Address

Dickinson, TX
77539

Website

Alerts

Be the first to know and let us send you an email when Fine Line Cutting LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Fine Line Cutting LLC:

Shortcuts

Share