Southern Pride of Texas

05/31/2024

15% off all product door gaskets through June 2. Discount applied automatically at checkout on SouthernPrideofTexas.com

02/26/2024

https://southernprideoftexas.com/blogs/troubleshooting/xlr-350-convection-motor

The early versions of the XLR-350 used a Fasco D326 front mount motor until 1983. After 1983 it switched to our standard 522004 convection motor. To replace the Fasco motor you would need the following parts as long as your existing convection system has an 8" x 8" fan plate that unbolts from the li...

02/24/2024

https://southernprideoftexas.com/blogs/troubleshooting/shock-relay-diagnosis-and-settings

02/23/2024

https://southernprideoftexas.com/blogs/troubleshooting/chain-drive-rotisserie-not-working-diagnostic-process

Your chain drive Southern Pride rotisserie smoker not spinning? Here is a guide to help you diagnose it correctly. CLICK HERE TO VIEW GUIDE

02/21/2024

https://southernprideoftexas.com/blogs/troubleshooting/why-cant-i-use-new-style-hangers-on-old-style-smokers

02/19/2024

https://southernprideoftexas.com/blogs/troubleshooting/no-power-to-smoke-extractor

02/15/2024

https://southernprideoftexas.com/blogs/troubleshooting/procedure-to-properly-set-the-set-screw-on-your-smoke-extractor-damper-motor

02/12/2024

https://southernprideoftexas.com/blogs/troubleshooting/yk-200-unresponsive-controls

02/10/2024

https://southernprideoftexas.com/blogs/troubleshooting/sc-200-make-both-chip-elements-heat-at-same-time

02/08/2024

https://southernprideoftexas.com/blogs/troubleshooting/spk-700-old-style-door-closure-modifcation

Very early models of the SPK-700 will require some slight modifcation to install the new style door closure 771001. When changing to the new style door closure one of the mounting bracket holes will line up correctly so mount the bracket using the one hole that lines up. You can then use the bracket...

02/07/2024

https://southernprideoftexas.com/blogs/troubleshooting/test-rotisserie-advance-button

To test for a faulty rotisserie advance button test for 120v across the N/O block on the back of the switch. When you push the button you should get 120v, and when not pushing you should not have 120v.

02/06/2024

https://southernprideoftexas.com/blogs/troubleshooting/rottiserie-burner-convection-do-not-stop-with-doors-opened

Door prox switch is stuck closed, or the relay is stuck closed. If you drop the magnetic door switch, and look at the red indicator light on the prox switch if it says red when door is open then bad proximity switch. If red LED does NOT stay lit then you have faulty clear relay behind control panel.