I Fix Nasty Water

Call Directions Website Contact the business

I Fix Nasty Water Tackling your toughest water problems... that nobody else will touch.

One of my ifixnastywater.com customers from Snook, Texas sent me a picture of this tomato, “This is the first decent tom...
06/22/2023

One of my ifixnastywater.com customers from Snook, Texas sent me a picture of this tomato, “This is the first decent tomato we’ve picked here in over 9 years. We think it’s the water!!”

04/29/2023

You can only answer this question if you have observed this phenomenon from the passenger seat: You’re vehicle is traveling down the road at 75 mph and raindrops are hitting the windshield. What happens to the raindrops?

Mother nature seems to be suggesting here that it is possible to separate salt from water under certain conditions.  On ...
09/26/2022

Mother nature seems to be suggesting here that it is possible to separate salt from water under certain conditions. On this shoreline, the same water precipitates different amounts of salt along different parts of the shoreline. What are the factors that are causing the salt compounds to be deposited on one part of the shoreline, and not all parts of it.

I would suggest that it is a force that is so small as to almost not be visible. Can this force be replicated or duplicated? I think there is the possibility. The RPG Water Catalyst LSSC (liquid, solids, separation, containment) has proven we can remove part of the salt from the water from the assays we have done after filtering production salt water with a total dissolved solids level of over 150,000 parts per million. The assay on the material we filtered out of this production salt water was 35% salt, along with rare earth elements and also a significant quantity of lithium. On this filter run, we removed the equivalent of 1 ton of dried solid material from a million gallons of water. On this particular disposal well, they were pumping 4.5 million gallons of water per day into the disposal well.

The total dissolved solids level on this particular body of water, Truscott Brine Lake, is 25,000 parts per million. By removing the salt and heavy metals there would be over 111,000 acre feet of water that could be made into potable water, or used for irrigation, or for recharge into aquifers such as the Ogallala, which does not have an optimistic future at current water extraction rates.

While I continue to fine tune the RPG Water Catalyst to capture and contain significant portions of salt out of water, much headway has been made recently for this and several other things in the last few months.

Philip Alford
Ifixnastywater.com
[email protected]
254-485-5869

Introducing the RPG Water Catalyst iii, the result of years of ingenuity, ideas and innovation.  Up until just a few sho...
09/20/2022

Introducing the RPG Water Catalyst iii, the result of years of ingenuity, ideas and innovation. Up until just a few short months ago, in order to produce the quality of water that the RPG Water Catalyst iii produces, was a totally manual small batch process. I was doing this manual process for myself and my bride to have the quality of water we sought, and to provide a very limited amount of drinking water to a select few.

Some of the features of RPG Water Catalyst iii include, but are not limited to, continuous flow, 24/7; a quality of water that is without equal; a whole house system that can be used in the home, in the yard and garden, and to provide water to livestock.

RPG Water Catalyst iii will filter iron, magnetite, gypsum, arsenic, mercury, copper, lead, zinc, hydrogen sulphide, and many other elements and compounds from your water. Systems can be built using off the shelf components for flow rates up to 250 gallons per minute, 24/7. We can ramp up these flow rates by connecting the motherboards of multiple control valves to go up to several thousand gallons per minute. We can design systems using individual valves to provide for any flow rate conceivable.

RPG Water Catalyst iii can be configured for zero-discharge applications, where all the water that goes through the system is used or recycled.

Some of the feedback we have received from people drinking RPG Water Catalyst iii water have included getting normal blood tests from people who are in stage five kidney failure and the reduction of swelling and pain in the legs, feet and ankles; diabetics getting normal blood sugar levels from their blood tests; restoring function from a severe sprain almost overnight; reduction of pain from surgeries from broken backs, and also from dialysis ports.

RPG Water Catalyst iii has a very smooth taste, and the water has no odors, the water is very hydrating and refreshing to the skin, and eyes. People drinking RPG Water Catalyst water report faster growing, and smoother fingernails. They also report their hair got thicker and shines with out chemical enhancement.

Everything mentioned about the RPG Water Catalyst iii is achieved without the use of salt or chemicals, or activated medias that must be replaced. Our intent has been to produce a water treatment system that is not service intensive, and one which will also provide many years of service.

Conventional filtration is based primarily on particle size, meaning that a particle can be removed from the water flow when the particle is larger than a pore space opening, which blocks the continued movement of the particle in the water. Sometimes a chemical reaction is involved, such as when using a media that has been “activated” by one of many techniques. These “activated media” must either be replaced or recharged on a frequent basis to continue to perform.

RPG Water Catalyst filtration is based on the surface area of a particle. Operating under this theory, we believe that the surface area to mass ratio is advantageous to our methods of filtration. In other words, the smaller the particle size, the more surface area there is to mass ratio. This allows for the RPG Water Catalyst to remove particles from the water flow stream that are more than 100,000 times smaller than the smallest particles conventional filtration is capable of removing utilizing the “particle to pore space size ratio.”

To achieve this form of filtration, we first must change the water. We must remove, or break, or scatter the tremendous bonding characteristics of water, so that these very small particles are free to move about throughout the water stream. In addition the water is free to move about throughout the filter media, without the additional drag created by the particle load that it started with.

This process is readily observable in nature. Different water features cause the water to free itself of its particle load, or the water is capable of going off in a different direction than the particle it is bonded to. When the water, and the particles it contains, are no longer able to influence each other, noticeable differences are readily observed in the water. The water no longer has a “static charge.” The water no longer forms a droplet that will “sit” on a surface. The water spreads, and seems to be wetter than before. While the water is readily observable, the sub microscopic particles it contains are not.

It is by changing the influence on these significantly small particles that seems to have the most influence on the bonding qualities of the water, even highly purified water. As mentioned previously, the smaller the particle, the more surface area there is to mass. It is at the surface of particles that the + or - charges greatly affect anything around it. By reducing or changing the polarity of the charges on the surface of nano-particles, we greatly impact the reaction of the water to these charges, therefore, the water acts differently. This also allows the nanometer sized particles to move about randomly within the volume of the water. The speed with which these particles are able to move about are extremely fast, similar to the speed that magnets are attracted to each other.

This changing the polarity of the nanoparticles creates charges within the inert media bed that we use with RPG Water Catalyst. Then as the water flows across the media bed it is broken up into significantly smaller streams, by estimation, streams that are 10 to 15 microns. For these nanometer sized particles to jump from the water to the naturally charged media bed particles, then is a small distance, relatively speaking.

Address

Stephenville, TX
76401

Alerts

Be the first to know and let us send you an email when I Fix Nasty Water posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to I Fix Nasty Water:

Share