Covey’s Quail

Covey’s Quail Hopefully be able to give you tricks and tips to make raising poultry and hatching eggs easier.

Everyone asks how they keep their quail warm on cold nights, and the response is carbs,carbs,carbs. Why? Its like throwi...
02/06/2026

Everyone asks how they keep their quail warm on cold nights, and the response is carbs,carbs,carbs. Why? Its like throwing pine in your wood stove quick fast heat and p**f its gone. I dont feed extra carbs at all. This is beef tallow rendered down i do myself and freeze in jars. This is added to their feed, fat content is something that every feed lacks for quail. I elevate the fat content year round. But more importantly in winter it is a dense energy source producing twice the energy of carbs and also helping them to regulate their body temp. Lard will do the same and then move into the seed oils. But the best results come from the animal fats. So throw some oak in the stove and keep that fire burning all night. This can be done with chickens also. Just passing along info I’ve learned about over the years and produces some good results for me.

Hot and cold spots in your incubator
02/06/2026

Hot and cold spots in your incubator

01/31/2026

Ice bath calibration of a thermometer

01/29/2026

Calibrate your incubator temperature and other devices before putting your eggs in.

01/28/2026

Humidity calibration DIY salt method for incubators and hygrometers #

Lets check back in on the humidity packs for calibration of humidity on our incubator. Now that we have days for them to...
01/28/2026

Lets check back in on the humidity packs for calibration of humidity on our incubator. Now that we have days for them to stabilize the incubator and prove they are doing their job etc here is a 24hr period and four continuous days of govee data. Averaging 62.4 high of 63.4 and low of 61.7 and 64 on the incubator when first plugged in on this 24hr period. so now we know our incubator is running 2 points high all the time, since this incubator doesn’t have a menu on display to adjust calibration, we just make a note that whatever the incubator is reading you subtract two points from the reading on display. Im doing a short calibration video on how to completely diy without packs using regular salt to calibrate your devices later on today.

These are some screenshots from my humidity video showing the accuracy or these humidity packs and why I use them to cal...
01/25/2026

These are some screenshots from my humidity video showing the accuracy or these humidity packs and why I use them to calibrate incubators. Also show the accuracy of the DIY salt method you can do at home to calibrate your humidity in your incubators. Everything is within 3 points of a target humidity set point of 62% of the boveda humidity pack. Maticoopx is a decent incubator and is known good quality control, the is maticoopx calibrated at the factory, the govee calibrated by diy salt method, and the boveda packs calibrated at their facility. Id say we are good to go on humidity and shows all methods used can verify correct calibration of humidity on this incubator, and ready to move on to temperature calibration.

01/25/2026

I will be doing a video on temperature and calibration on new incubator’s here shortly. Thanks

01/25/2026

What I do to calibrate a new incubator’s humidity readings and dial them in for consistent hatches.

Address

Stony Creek, VA
23882

Website

Alerts

Be the first to know and let us send you an email when Covey’s Quail posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share

Category